Skip to main content

Host and Application locally and access it over the internet via ngrock

By

 ngrock creates a tunnel from your local machine to ngrock server and host it on the internet via their HTTPS url 

Resister an account on ngrock and login 

#Download the client 
curl -sSL https://ngrok-agent.s3.amazonaws.com/ngrok.asc \
	| sudo tee /etc/apt/trusted.gpg.d/ngrok.asc >/dev/null \
	&& echo "deb https://ngrok-agent.s3.amazonaws.com buster main" \
	| sudo tee /etc/apt/sources.list.d/ngrok.list \
	&& sudo apt update \
	&& sudo apt install ngrok

#add the authToken
ngrok config add-authtoken 2p7Oc

#start a python server on your application 
python -m http.server 3000 

#start the server - use the same port as the python server (3000 in below example)
ngrok http http://localhost:3000 --request-header-add "ngrok-skip-browser-warning: true"
 


Setting up a Request Header 

- Login to the application --> Univeral Gateway --> Edges
- Create an Edge --> Request Headers --> `ngrok-skip-browser-warning :12
- go back to overview --> start a tunnel 
- it will generate a command, run it on your terminal after you start the python server

ngrok tunnel --label edge=edghts_2p7QTFLhALomQphvcjq7UrWpNcG http://localhost:3000

Comments

Post a Comment

Popular posts from this blog

Pivoting into an internal network behind firewall

By
    Accessing a Victim network from Windows box which is pivoted to Kali #On Kali sshuttle --listen 0.0.0.0 -r user@10.10.10.10 192.168.1.0/24 or ./chisel server --port 9001 -reverse #On Victim ./chisel.exe client 10.10.10.1:9001 R:0.0.0.0:1080:socks .\chisel.exe client 10.10.10.1:9001 R:8080:127.0.0.1:8080 R:8888:127.0.0.1:8888 R:9090:127.0.0.1:9090 #On windows route print #delete default route route delete 0.0.0.0 #add a new route to kali- setting kali ip as gateway; kali_ip=which is on the same subnet as the windows box route add 0.0.0.0 mask 0.0.0.0 KALI_IP #Now you should be able to access all the sites which are accessible on kali from windows box. #If the above doesnt work #asuming Kali and windows are on Eht0 #add a firewall rule to allow Kali ip traffic netsh advfirewall firewall add rule name="Allow VPN Traffic" dir=in action=allow protocol=any remoteip=KALI_ETH0_IP #on Kali - Allow tun0 traffic to forward on iptables sudo iptables -P FORWARD ACCEPT ...
Post a Comment
Read more